If you have any questions on any knife, please email me at questions@bladehq.com please remove SPAM from my address.
Several people have requested that I also show my recent knives, even if they are all ready sold. So the knives below are not all available. If you have any questions, please let me know. If you wish to purchase a knife, please call me at (859) 887-5400 between 7:00am and 9:00pm. Please don't forget, my photography skills are a long way from my knifemaking skills. All measurements are approximate.
Click here for more knives that are available at my dealers.
Thanks for looking,
Pix 28
The Guardian
Folding Boot knife above has a blade length of 3 3/8", has dual 18
K solid Gold thumb studs, and the steel is Devin Thomas Spirograph. The
bolsters, liners, and back spacer is Titanium. I also file worked the
back spacer. The scales are some very highly figured Mother of Pearl.
$975.00
Pix 27
The Guardian Folding Boot knife above has a blade length of 3 3/8", has dual thumb studs, and the steel is S30V. The open length is 7 3/4" and closed is 4 1/4". The liners are Titanium. The spacer and scales are G10. $400.00 SOLD Please check here
Pix 25
The knife above has a 2 1/2" blade of S30V. The scales are Mastodon Ivory. The liners and bolsters are Titanium. The liners are jeweled. The screws are 24 k Gold plated. The thumb stud has a 2.25 pt Ruby. $475.00
Pix 26
The One-Eyed Jack above has a blade of ATS-34. The scales are Ivory Micarta®. $340.00 SOLD Please check here
pix 64
The knife above has
a 2 1/2" clip point blade of ATS-34. The scales are second cut
Mastodon Ivory. The Titanium back spacer and liners are anodized and
file worked. The screws are 24 K Gold plated. $600.00
pix 6
The knife above has a blade length of 4 1/8" and is ATS-34. The scales and spacer are Maroon Linen Micarta®. I have installed a pocket clip. $500.00
pix 18 $340.00
pix 17 $325.00
Both One-Eyed Jacks above have a pocket clip. The steel is S30V. The top knife has scales of Maroon Micarta® and the bottom is G10. SOLD Please check here
pix 19
The knife above has a 2 1/2" blade of George Werth Damascus. The bolsters are Bob Eggerling's Mosiac Damascus. The scales are stabilized Mastodon. The spacer is Universal Damascus and has been file worked and heat blued. The thumb stud is 18 k Gold. $825.00
pix 20
The knife above has a 2 1/2" blade of George Werth Damascus. The bolsters are Bob Eggerling's Mosiac Damascus. The scales are some beautiful Black Lip Pearl. The spacer is Universal Damascus and has been file worked and heat blued. The thumb stud is 18 k Gold. $750.00
pix12
The knife above has a 2 15/16" blade length of Universal Damascus, the composition is O-1, 1095, and Nickel. The overall length is 7". The scales are Stabilized English Walnut. The bolsters and liners are titanium. The spacer is G10. $475.00
pix 8
The knife above has a blades length of just under 3" and is S30V. The overall length is length 7" I have installed a pocket clip. The blade is marked "Prototype". $325.00
pix9
The knife above has
a 2 1/2" blade
length and is Universal Damascus, the composition is O-1, 1095, and
Nickel. The overall length is 5
7/8". I installed a Ruby in the stainless thumb stud. The scales
are Ivory paper Micarta. I can install a pocket clip on this, if desired.
$340.00
The knife below has
a blade length of approximately 4 1/16" and is hollow ground. The
steel is D-2. The bolsters, spacer, and liners are Titanium. The scales
are Giraffe. A nice leather pouch (made to fit by Gary Graley) comes
with this knife. 5 9/16" closed, 9 9/16" open. SOLD
Please check here
pix55