Here are the knives I will have at the Las Vegas Classic. Please don't forget, my photography skills are a long way from my knifemaking skills. All of these knives have a Titanium spacer and the Titanium liners are jeweled. All measurements are approximate.

Thanks for looking,

pix65

The knife above, has some beautiful Mastodon Bark Ivory. The flat ground ATS-34 blade has a length of approximately 2 7/8". The overall length is approximately 7" and the closed length is approximately 4". The Titanium liners and spacer are file worked, as well as the blade. All screws, except the Titanium thumb stud screw are also file worked. The screw for the Titanium thumb stud is 24k Gold plated. $775.00

pix57

The knife above has  2 7/16" blade length. The steel is ATS-34. 3 1/2" closed, 6" open The scales are Mastodon Ivory. The spacer and liners are file worked. The screws are 24k gold plated. $650.00

pix63

The knife above has a blade length of approximately 4 1/16" and is flat ground. The steel is ATS-34. The bolsters, spacer, and liners are Titanium. The scales are maroon linen Micarta.  (Sorry about the picture quality) 5 1/2" closed, 9 5/8" open. $525.00

pix52

The knife above has a blade length of approximately 2 1/2" and is flat ground. The steel is D-2. The bolsters, spacer, and liners are Titanium. The scales are G-10. I have installed a pocket clip. 3 1/2" closed, 6" open. $465.00  SOLD

pix61

The knife above has a blade length of approximately 2 1/2" and is flat ground. The steel is ATS-34. The bolsters, spacer, and liners are Titanium. The screws are 24k gold plated. The scales are nicely figured Red Abalone, not composite (actually pink) 4" closed, 6 7/8" open. $600.00

pix62

The knife above has a blade length of approximately 2 7/8" and is hollow ground. The steel is ATS-34. The bolsters, spacer, and liners are Titanium. The scales are maroon linen micarta. 4" closed, 6 7/8" open. $400.00 SOLD

pix54

The knife above has a blade length of approximately 3 5/16" and is flat ground. The steel is D-2. The bolsters, spacer, and liners are Titanium. The scales are Sambar Stag. A nice leather pouch (made to fit by Gary Graley) comes with this knife. 4 5/8" closed, 8" open. $600.00

pix55

The knife above has a blade length of approximately 4 1/16" and is hollow ground. The steel is D-2. The bolsters, spacer, and liners are Titanium. The scales are Giraffe. A nice leather pouch (made to fit by Gary Graley) comes with this knife. 5 9/16" closed, 9 9/16" open. $675.00

Knife below has

2 7/8” Clip Point ATS-34 steel
3 pt. (approximately 3mm) Diamond (SI2 G/H rating) Thumb Stud   
Elephant Ivory scales
Titanium bolsters, spacer, and liners
Spacer, and liners file worked
24k Gold plated screws
4 1/8" closed, 7" open.
Price as shown with engraving is $1,150.00  Engraving by Billy Bates. 

This photo was taken before the engraving.

pix57

The knife below has a 2 7/8" Damascus blade (Devin Thomas). The thumb stud is a 3 pt. AA grade blue Sapphire. The scales are presentation grade MOP. The spacer is file worked on the inside also as are the liners. 4 3/16" closed, 7" open. $1,200.00, with engraving by Billy Bates. 

The "Kentucky Gambler"

Above picture, taken before engraving.

pix 58

The knife below has a 2 1/2" clip point blade of ATS-34. The thumb stud is a 2 pt (SI2 G/H rating) diamond.
The scales are Mother of Pearl. The liners and spacer are file worked. 3 7/16" closed, 5 7/8" open. $750.00

pix 59

The knife below has a blade length of approximately 2 7/8". The blade steel is BG-42. The amber jigged bone scales, DO NOT have a lanyard hole. 4" closed, 6 7/8" open. $450.00 SOLD

The knife below has a 2 3/8" blade of ATS-34. The scales are very dark green (they look almost black) jigged bone.  3 1/2" closed, 5 3/4" open. $350.00

pix 45



HOME