The knives below are available for immediate delivery

You are currently viewing an archived page, nothing here is for sale.
BladeHQ.com has purchased this website and is working on a new design.
In the meantime, please feel free to browse the Custom Knives section at www.bladehq.com.

(A.T. Barr's new website can be found at www.custom-knives.com).

If you have any questions on any knife, please email me at questions@bladehq.com please remove SPAM from my address.

Here are the knives I have available for immediate shipment. If you have any questions, please let me know. If you wish to purchase a knife, please call me at (859) 887-5400 between 7:00am and 9:00pm. Please don't forget, my photography skills are a long way from my knifemaking skills. All measurements are approximate.

The knife above has a 3" blade of George Werth Damascus (Overlap Twist) the composition is 5160 and 1075, with Nickel and Robert Eggerling bolsters. I used 24 k gold wire to wrap the Presentation grade Mother of Pearl. The thumb stud is solid18k gold. I file worked the liners and spacer and jeweled the liners. The screws are 24 k gold plated. $1200.00

The knife above has a 2 15/16" blade length of Thunderforge Damascus, the composition is O-1, 1095, and Nickel. The overall length is 7" 4". The scales are Stabilized English Walnut. The bolsters and liners are titanium. The spacer is G10. $535.00

The knife above has a blades length of just under 3" and is S30V. The overall length is length 7" I have installed a pocket clip. The blade is marked "Prototype". $325.00

The knife above has a blades length of just under 3" and is S30V. The overall length is length 7". I can install a pocket clip on this, if desired. $325.00

The knife above has a 2 1/2" blade length and is Thunderforge Damascus, the composition is O-1, 1095, and Nickel. The overall length is 5 7/8". I installed a Ruby in the stainless thumb stud. The scales are Ivory paper Micarta. I can install a pocket clip on this, if desired. $375.00

The knife above has a blade length 2 7/8" and is S30V. The overall length is 6 7/8". The scales are Ivory paper Micarta. I file worked the Titanium spacer, jeweled the liners, and installed a Ruby thumb stud. $495.00

The knife above has a blade length of 4 1/8" and is ATS-34. The scales and spacer are Maroon Linen Micarta. I have installed a pocket clip. $500.00 ON HOLD

The knife above has a 2 7/16" blade length and is Thunderforge Damascus, the composition is O-1, 1095, and Nickel. The overall length is 5 3/4". I installed a Ruby in the stainless thumb stud. The scales are Black lip Pearl $550.00 SOLD

The knife above has a blade length of 2 5/8" and the steel is S30V. The liners are Titanium. The scales are amber jigged bone. The pocket clip is installed for tip down carry. $340.00

The knife below is my collector series of my 2 7/8" clip point. This one shown has maroon linen scales. The one on hand has blue G10 scales. It has a Titanium spacer and the liners are jeweled. When open the length is 6 7/8" and when closed it is 3 7/8". It has a pocket clip. $425.00

The next two knives below are user grade. The spacers are G10 and the liners are not jeweled. The steel is ATS-34 and the blade lengths are approximately 3 5/16". When open the length is approximately 8" and when closed 4 1/2". One has a clip point and one has a drop point. All they both have a pocket clip. $425.00

The knife below has a blade length of approximately 4 1/16" and is hollow ground. The steel is D-2. The bolsters, spacer, and liners are Titanium. The scales are Giraffe. A nice leather pouch (made to fit by Gary Graley) comes with this knife. 5 9/16" closed, 9 9/16" open. $600.00